Brother TN630 Compatible Toner Cartridge — Black

This is the standard-yield black cartridge for Brother's most common home and small-office mono lasers. If your printer is asking for a TN630, this is the part that goes in.

• Chip fitted — your printer reports levels normally.
• 1,200 pages per cartridge
• Two-year warranty, printer damage covered
• Free shipping over $35, 30-day returns

What you get

One sealed cartridge per pack, filled to the full 1,200-page ISO 19752 count at 5% coverage. The drum is a separate part on these printers (Brother DR630) and is not included — a drum normally outlasts several toner cartridges.

Chip and toner levels

A chip is fitted, so the printer counts down and reports remaining toner exactly as it does with a genuine cartridge. You will not get a "non-genuine supply" block, and you do not need to reset anything by hand.

Higher yield option

If you print more than about 100 pages a month, the TN660 high-yield cartridge fits every printer on this list and runs 2,600 pages. Same housing, more toner, lower cost per page.

Fits these printers

HL-L2300D, HL-L2305W, HL-L2315DW, HL-L2320D, HL-L2340DW, HL-L2360DW, HL-L2380DW, DCP-L2520DW, DCP-L2540DW, MFC-L2700DW, MFC-L2707DW, MFC-L2720DW, MFC-L2740DW

Fitting it

1. Open the front cover and pull out the drum and toner assembly together.
2. Push down the green lock lever and lift the old toner cartridge out of the drum.
3. Rock the new cartridge gently side to side five or six times to level the toner.
4. Slide it into the drum until it clicks, then slide the assembly back in and close the cover.

Hahahaprint is not affiliated with Brother, Canon, Samsung or HP. Brand names and part numbers are shown for compatibility reference only.